Wall Shot blasting
Wall Shot blasting

Wall Shot blasting 

PAXAA manufactures portable closed-loop vertical shot blast system for wall blasting & cleaning. This system is very economical, fast & flexible. The final surface of the wall is completely dry, clean, with rough texture.
 

This operation can be used on steel & concrete. It is usually used for cleaning ship hulls, wall of petroleum tanks, large diameter pipes, etc.
 

It can be used in closed areas & confined space without risk on operators health & safety. The system use closed loop circulation of abrasive, therefore it is environmental friendly & has no emission. Recycling of the abrasives brings low consumable cost.
 

Typical methods like chemical, damp-blasting or high pressure hydro-washing  leave the surface wet so further operation needs time for drying process.

Technical Specifications:
 
Model
PBH8
Blasting width
580 mm
Blasting speed
2.6-5.2 m/min
Blasting capacity
50-100 m2/hour
Power consumption
30-45 kW
Air requirement
105 liters/min @ 6bar











 

Ask for information
For more information, please fill out the below form. 
  ____  ______  ____           
 / ___||___  / / ___|          
/ /___    / / / /___ __      __
| ___ \  / /  | ___ \\ \ /\ / /
| \_/ |./ /   | \_/ | \ V  V / 
\_____/\_/    \_____/  \_/\_/
Please enter characters displayed on the image